- Milling Method: Grinding Roller Mill
- Milling Capacity: 0.5-25TPH
Trapezium grinding mill is innovatively designed through deep research on grinding mills and development experience. It absorbs the latest powder grinding technology and concept. This grinding mill perfectly satisfies the production demands of the customers on 200-33μm (80-425Mesh) fine powder. You can use our grinding mill to process limestone, calcite, dolomite, petroleum coal, gypsum, barite, marble, talc, coal powder, etc.
1. Arbitrary Adjustment of Fineness: The product fineness of SCM Ultrafine Grinding Mill can be adjusted arbitrarily between 325 meshes and 2500 meshes, and can reach D97 > 5 micron at one time.
2. High Efficiency, Low Energy Consumption: To produce same powder under the same power, the SCM is 40% higher on efficiency and 70% lower on energy consumption than air-flow mill and stirring mill.
3. Safe Structural Design: There are no rolling bearings and screw in the grinding chamber. There is no problem of bearing and seal vulnerability and the hidden danger of screw loosening destroying.
4. More Environmentally Friendly: SCM Ultrafine Grinding Mill adopts high-efficiency pulse dust collector and muffler. It has no dust pollution and noise pollution and fully meets the national environmental protection standards.
You can ask our experts for detail.
|Max. Feed Size(mm)||<30||<30||<35||<40||<50||<40||<45||<50|
|fineness can reach to 0.038||fineness can reach to 0.038||fineness can reach to 0.038||fineness can reach to 0.038||fineness can reach to 0.038||fineness can reach to 0.038||fineness can reach to 0.038||fineness can reach to 0.038|
|Powder classifier motor(kW)||7.5||11||18.5||22||55||22||37||55|
|Model of electromagnetic vibrating feeder||GZ2F||GZ2F||GZ3F||GZ4F||GZ5F||GZ3F||GZ4F||GZ5F|
|Power of electromagnetic vibrating feeder(kW)||0.15||0.15||0.2||0.45||0.65||0.45||0.65||0.65|