- Separating Method: Magnetic Separation
- Processing Capacity: 20-600t/h
Magnetic system materials adopt the NdFeB with high magnetic energy product and high coercivity, strong magnetic density and high affect depth; the surface of the cylinder is lined with SKE wear-resistant rubber.
1. Magnetic system is compounded of ferrite and permanent magnets; the average magnetic induction intensity of cylinder surface is 100~600mT.
2. The same cylinder can be equipped with three types of tank adapting to different dressing process.
3. The small area is taken, good separation for magnetic mineral, reduce the load of the next process.
1. Permanent magnetic drum separators have 3 kinds including downstream type, counter flow type and semi- counter flow type according to the difference of base structure.
2. Downstream type permanent magnetic drum separator: slurry flows in the same direction with drum.
3. Counterflow type permanent magnetic drum separator: slurry flows over against drum, which creates great conditions for cleaning of non-magnetic ores. The non-magnetic ores approach the clean surface of the drum and the magnetic ores can be absorbed in the strongest magnetic field.
4. Semi-counter flow types permanent magnetic drum separator: slurry is fed into cavity from the bottom of the drum, and the magnetic ores fall into concentrate tank after reaching a certain height, while the non-magnetic ores will enter into tailings tank along with slurry in the opposite direction with drum.
Model & Spec. | CTBY1018 | CTBY1024 | CTBY1030 | CTBY1218 | CTBY1224 | CTBY1230 |
Diameter of Cylinder (mm) | 1000 | 1000 | 1000 | 1200 | 1200 | 1200 |
Length of Cylinder (mm) | 1800 | 2400 | 3000 | 1800 | 2400 | 3000 |
Surface Magnetic Density (mt) | 350~550 | 350~550 | 350~550 | 350~550 | 350~550 | 350~550 |
Rotating Speed of Cylinder (r/min) | 23 | 23 | 23 | 20 | 20 | 20 |
Capacity of Dry Ore (t/h) | 42 ~65 | 53 ~86 | 82~124 | 58 ~97 | 71~120 | 103~158 |
Feed Size (mm) | 0~10 | 0~10 | 0~10 | 0~10 | 0~10 | 0~10 |
Slurry Density (%) | 20 ~50 | 20 ~50 | 20 ~50 | 20 ~50 | 20 ~50 | 20 ~50 |
Motor Power (kW) | 5.5 | 7.5 | 7.5 | 7.5 | 11 | 11 |
Total Weight (t) | 5.2 | 6.4 | 7.1 | 6.7 | 7.2 | 8.9 |
Equipment Length (mm) | 3160 | 3790 | 4460 | 3380 | 4190 | 4770 |
Equipment Width (mm) | 2250 | 2250 | 2250 | 2460 | 2460 | 2460 |
Equipment Height (mm) | 1750 | 1750 | 1750 | 2000 | 2000 | 2000 |