- Crushing Capacity: 0-1150t/h
Welcome to SKE
Find Machines, Solutions and More.
Online Service: 24h/7
HGP Single Cylinder Hydraulic Cone Crusher
- It is single cylinder hydraulic cone crusher. It can crush medium hard and extra hard material into fine particles.
- Feeding Size: 0-220mm
- Output Size: 0-75mm
- Crushing Capacity: 0-1000t/h
- Crushing type: Secondary Crusher, Fine Crusher, Medium Hard Rock Crusher, Hard Rock Crusher
Overview
HGP Single Cylinder Hydraulic Cone Crusher is a new high-efficiency cone crusher independently researched, developed and designed by SKE. This cone crusher integrates mechanical, hydraulic, electrical, automation and intelligent control technologies, and possesses advanced cone crusher technologies in the world.
Features
- It can crush harder rocks, medium hard stone, and soft rocks, etc.
- Its final products is well shaped. Optimized combination of crushing frequency, eccentricity, and laminated crushing, so that the crushed material of the size of the discharge port can maintain a better product shape.
- Lower production cost. The optimized liner design makes the unit steel consumption lower; the lamination crushing and full feeding make the equipment operation rate higher.
- Simple operation and maintenance. With only button control, hydraulic pressure can be used to achieve stepless adjustment of the discharge opening, and it can be carried out during the production process, making the operation more intuitive. After finishing the wear parts, no packing is needed during assembly.
- High degree of automation.
Working Principle
When a HGP Single Cylinder Hydraulic Cone Crusher works, driven by the motor, the transmission shaft rotates under the action of belt pulley and triangular belt. Next, the transmission shaft drives the eccentric sleeve to make it rotate around the axis. Meanwhile, the eccentric sleeve forces the movable cone to do pendular movement. This movement makes the movable cone and fixed cone sometimes close to, sometimes far away from the rolling wall. Materials are continuously shocked, squeezed and crushed in the crushing cavity between the crushing wall and the rolling wall. Finally, materials are discharged out of the machine when their fineness reaches the discharging standard.
Specification
| Fine Crushing | |||
| Model | Crushing Capacity(TPH) | Output Size(mm) | Motor Power(kw) |
| HGP100 | 35-115 | 8-35 | 90 |
| HGP200 | 65-210 | 8-35 | 160 |
| HGP300 | 100-340 | 8-45 | 250 |
| HGP500 | 100-500 | 8-45 | 315 |
| HGP600 | 245-715 | 8-50 | 355 |
| Medium Crushing | |||
| Model | Crushing Capacity(TPH) | Output Size(mm) | Motor Power(kw) |
| HGP100 | 135-235 | 35-60 | 75-90 |
| HGP200 | 160-370 | 35-60 | 110-160 |
| HGP300 | 250-540 | 35-65 | 160-250 |
| HGP500 | 300-1000 | 45-75 | 250-315 |
| HGP600 | 330-1000 | 50-75 | 355 |
